PRODUCTS
Our expertise in the germicidal treatment by UVC radiation, allow us to create the best system for your needs. Our team can guide you in the design and creation process for your specific request.
CERTIFICATION :
We can supply lamps, as well as associated ballasts with CE and UL certifications..
We have created some easily usable disinfection devices that we manufacture on our French site.
HAND-HELD DISINFECTION DEVICE
DISINFECTION MOBILE TOWER
Ultraviolet radiation in the 200-300 nanometer (nm) range is extremely effective in killing microorganisms such as airborne, waterborne and surface bacteria, viruses, yeasts and molds.
ERIES® benefits from the experience of Light Sources (USA), manufacturer of these lamps and its subsidiary in Europe, LightTech (Hungary), which allows a faster supplying.
LAMPS TYPES:
Lamps usually used in our equipments are " low pressure of mercury " type in the ranges:
4-PINS CONNECTORS:
The peculiarity of these lamps is their 4 pines connectors in a single extremity
SYSTEM:
Lamp UVC is only a part of the system which must be completed and optimized with the ballast chosen according to its technical features. This is very important for the equipment performance.
GERMICIDAL TREATMENT RAMP:
Ensures antisprouting treatment on surfaces.
POWER SUPPLY BOXES:
Development for power supply of several germicidal lamps.
LAMP FOR CLEAN ROOM ISO 7, ISO 8:
Decontamination of the room during the stand by periods.
SPECIAL EQUIPMENTS
Study and construction of special equipments. We have also developed software to calculate exactly the necessary dose according to your projects and needs.
UVC ENERGY LEVEL
in a fresh air duct
HIGH FREQUENCY ELECTRONIC BALLASTS
HF electronic ballasts allow the optimization of UVC lamps and extend their lifetime.
Every type of ballast allows electric supplying one or two lamps and it corresponds to a certain range of power.
These devices check proper functioning of lamps. The information can be then treated in the automatism of the germicide treatment.
CONTROL MODULE
For certain model of ballasts, we have developed a running control module. This opto-coupled module allows handling the LED to feed an automatism relay.
CMA02/04 : 2 or 4 inputs 2 ou 4 outputs
CMB04/06 : 4 ou 6 entrées - 1 sortie
HOUR COUNTER TC9000
Suitable for use with UVC lamps. This time counter is pre-programmed for counting the times of use of the standard series UVC lamps or 9000 hours. The countdown function takes also the ignition phases. When the lifetime of the lamps has elapsed, a message appears on the screen and prevents the necessary exchange of the lamps.
To complete your UVC germicide implementation, we also supply accessories for equipments, as well as spare parts and eyes and skin protection. .