Lampes UV - Applications
Products
ACCESSORIES 

As a complement to our products, we also supply the accessories which insure the functioning the germicidal treatment systems, a selection of materials which answers the highest requirements regarding safety.

CONNECTORS
Lamps Connectors
Plastic Connector is for the UV tubes of the series T5 (Ø 15 mm), supporting until 1A max. 
The plastic is resistant to UV. 

Ceramic Connector was realized for supplying UV tubes T6 (Ø 19 mm) the current of which in the tube is upper to 1A. 

CLIPS 
Fixation clips of tubes on equipments

Tubes are maintained by clips allowing easy maintenance.  
Placed up at the end of every tube this clip insures right fixation of tubes. 

 Models :
CLIP-IT36 for the serial lamps T5, Standard and HO Lamps
CLIP-IT37 for the serial lamps T6, Amalgam Lamps

CAP
Connections Protection Cap
These caps cover the connectors of the T5 series UV tubes to ensure protection when washing the machine.
COMPLETE CABLE (3M - 4M - 5M) 
Other length on request 

• AWG20 Cable + Plastic Connector + CAP 
• AWG18 Cable + Ceramic Connector + CAP 
• Made and adapted to our lamps and to our ballasts. 
• Equipment carefully selected and tested to ensure optimum operation.


STA4 CONNECTOR

4 pins Male / Female + Armor plating + Lock on cable PG11


Studied and adapted for the use with the power cables of lamps.  
Facilitate the maintenance of machines 


UVC RADIATION IS DANGEROUS TO THE SKIN AND THE EYES 
OPERATORS WILL NEED TO PROTECT THEMSELVES FROM DIRECT OR INDIRECT RADIATION
The fugues linked to the geometry of the devices can be UVC's emission sources
 and generate risks for the eyes and the skin. 
It is mandatory to be protected from these radiations by utilization of elements of industrial safety.
SAFETY GLASSES
Eyes Protection - filters for ultraviolet.

• EN170 (2C – 1.2) Compliance. 
• UV protection. 
• Eye thickness: 2.00 mm. 
• Material: 100% polycarbonate.

PROTECTIVE VISOR 
Face protection - filters for ultraviolet.

• EN170: 2002. / EN172: 1994. 
• Covers the user’s face completely. 
• Spherical polycarbonate screen. 
• Easy adjustment of the headband thanks to the rack system. 
• Wide field of view.

TC9000
HOUR COUNTER
Suitable for use with UVC lamps. This time counter is pre-programmed for counting the times of the standard series UVC lamps or 9000 hours. The countdown fonction takes also the ignition phases. When the lifetime of the lamps has elapsed, a message appears on the screen and prevents the necessary exchange of the lamps.


CMA/CMB
CONTROL MODULE 
Electronic control module to use the right information in a automation system.
CMA02/04 : Opto-coupler 2/4 inputs-2/4 outputs
CMB04/06 : Opto-coupler 4/6 inputs-1 output


HD2302.0
PHOTO-RADIOMETER
The HD2302.0 is a portable instrument with a large LCD display. It measures illuminance, luminance, PAR and irradiance (across VIS-NIR, UVA, UVB and UVC spectral regions or measurement of irradiance effective according to the UV action curve).e HD2302.0 est un instrument portatif avec écran LCD de grande dimension, et mesure l’éclairement lumineux, la luminance, le PAR et l’éclairement énergétique (dans les régions spectrales VIS-NIR, UVA, UVB et UVC ou dans la mesure d’éclairement énergétique efficace selon la courbe d’action UV). 
UVA-UVB-UVC PROBES
MEASURING PROBES
• LP 471 UVA : 315nm…400nm (Peak 360nm) 
• LP 471 UVB : 280nm…315nm (Peak 305nm) 
• LP 471 UVC : 220nm…280nm (Peak 260nm) 


UV MONITOR PRO 5

UVC radiation control


Works with UV sensor, supplies a relay contact and a radiation levels LED